Products
IDM NTD4102 Dual-Port ADM Chain Network Telephone Optical Multiplexer
Fiber break rerouting self-healing, dual-channel physical isolation, 10-channel telephone DIP switch network-management-free provisioning
The IDM NTD4102 multi-service optical multiplexer provides dual optical ports and supports the ADM chain network function; SFP optical modules allow convenient selection of single-mode/multi-mode, single-fiber/dual-fiber, wavelength, transmission distance, and other parameters.
View Details →
IDM NTD421 Magneto Telephone Optical Multiplexer
2 magneto voice channels, dual physically isolated Fast Ethernet, 3 ports with VLAN partitioning, dual optical port ring network DIP switch
Provides 2 telephone channels plus 2 groups of physically isolated Fast Ethernet ports, where ports 1, 2, 3 and the fourth channel are physically isolated, with 220V power supply. Dual physically isolated wire-speed 100M Ethernet channels; the three shared 100M Ethernet ports can also be partitioned by VLAN isolation. Voice channel interfaces can be FXO central office automatic telephone, FXS remote automatic telephone, or MAG magneto telephone, and 2 RS485 interfaces are provided. Supports chain network and ring network applications with dual optical port cascading. The 8-bit DIP switch on the panel is used to set the site address in a chain network. Provides a standard SNMP network management interface.
View Details →
IDM NTD421 Elevator Five-Party Intercom Optical Multiplexer
Dedicated interface card, compatible with Mitsubishi and Otis signaling, dual-channel single unit covers five parties, no GSM billing
Because the five-party intercom telephone and the ordinary telephone work on different principles, an ordinary telephone optical multiplexer cannot be used. Raytrans' dedicated five-party intercom interface card matches the signaling of five-party intercom units, enabling five-party communication between the central office and the machine room, car, car top, and pit. Five-party intercom optical multiplexers include the 2-channel IDM NT202(DT), 4-channel IDM NT104(DT), 8-channel IDM ENT448(DT), 30-channel IDM 30EN(DT), and so on. They meet the signal transmission needs from elevator group machine rooms to the central office monitoring room at different capacities, and are also suitable for fiber optic connections during monitoring room relocation or consolidation.
View Details →
IDM NTD421 Multi-Service Telephone Optical Multiplexer
2 telephone channels, 2 groups of physically isolated Fast Ethernet ports, dual optical port mutual backup, single-fiber 20 km
The IDM NTD421 multi-service optical multiplexer provides a 250M optical interface, 2 telephone channels and 2 groups of physically isolated Fast Ethernet ports, where ports 1, 2, 3 and the fourth channel are physically isolated, and a 220V power supply. The IDM NTD421 multi-service optical multiplexer can be used in point-to-point applications with dual optical port mutual backup. It provides a standard SNMP network management interface.
View Details →
IDM-NVD8100/4K Codec
Single unit integrates live production and recording, 4K60 encoding and decoding, power consumption <10W, 1080P60
The IDM-NVD8100/4K series HD network audio and video codec is a high-quality, broadcast-grade HD audio and video real-time encoding and decoding product. It supports video encoding and decoding standards such as H.265/HEVC and H.264/AVC, and audio decoding standards such as AAC, MP3, MPEG2, and PCMA. It supports 1-channel HDMI video signal input, 1-channel HDMI video loop-out, and 1-channel HDMI video signal output; it supports 3.5mm audio signal input and output, as well as HDMI embedded digital audio. IDM-NVD8100/4K high
View Details →
IDM OMP200-30E Ultra-Broadband Integrated Service Optical Multiplexing Equipment
One unit replaces a voice optical multiplexer plus E1 uplink; dual optical port 1+1 switching; dual power supply; services continue on power failure
The IDM OMP200-30E ultra-broadband integrated service optical multiplexing equipment uses a standard optical fiber transmission channel (G.703 standard) and adopts the PCM30/31 format. It provides dual-fiber mutual backup and directly offers multiple user interfaces such as voice, wire-speed 100M Ethernet, and E1. The device is simple to install and can meet the requirements of various application environments.
View Details →
IDM OMP2000-4E1-30E Ultra-Broadband Integrated Service Optical Multiplexing Equipment, 30 Telephone Lines, 2 Gigabit Ethernet Ports, 4E1
dual-fiber mutual backup
The IDM OMP2000-4E1-30E physically isolated gigabit network telephone optical multiplexer utilizes 2.5G optical fiber transmission bandwidth (G.703 standard), adopts the PCM30/31 format, provides dual-fiber mutual backup, and directly provides telephone service interfaces (30 FXO, FXS, or magneto lines in total), 2 groups of physically isolated line-rate 1000M Ethernet (2000M in total), E1 (1-4 E1 channels in total),
View Details →
IDM OMP2000-8E1-30 Optical Multiplexer
8-channel E1 transparent transmission, dual-gigabit physical isolation, 2.5G optical port 1+1 protection, single-fiber convergence
Provides two 2.5Gbps SFP optical interfaces with 1+1 protection for optical ports; provides two independent 1000M Ethernet interfaces; the IDM OMP2000-8E1-30 physically isolated gigabit network optical multiplexer is simple to install and can meet the requirements of various application environments.
View Details →
IDM OMP2400 Ultra-broadband Integrated Service Optical Multiplexing Equipment
2.5G optical port 1+1
The IDM OMP2400-4E1-30E ultra-broadband integrated service optical multiplexing equipment utilizes 2.5G optical fiber transmission bandwidth (G.703 standard) and adopts the PCM30/31 format. The IDM OMP2400-4E1-30E physically isolated gigabit network optical multiplexer is simple to install and can meet the requirements of various application environments.
View Details →
IDM OMP2400-8E1-30 Ultra-Broadband Integrated Service Optical Multiplexing Equipment
2.5G optical transmission
The IDM OMP2400-8E1-30 multi-service optical multiplexer utilizes 2.5G optical fiber transmission bandwidth (G.703 standard) and adopts the PCM30/31 format. It provides dual-fiber mutual backup and directly offers 64 kbit/s service interfaces and four groups of physically isolated line-rate 100M (400M in total). Meanwhile, the IDM OMP2400-8E1-30 is simple to install and can meet the requirements of various application environments.
View Details →
IDM OMP3500-30 Integrated Service Optical Fiber Transmission Equipment
One 1U unit aggregates 24 E1 channels, physically isolated gigabit Ethernet, and PCM voice over the same fiber
Provides 2.5G optical interfaces, a standard 19-inch 1U chassis, (up to 24 groups of E1 + 2 physically isolated wire-speed 1000M Ethernet interfaces + 4 physically isolated wire-speed 100M Ethernet interfaces + up to 3 8-channel/10-channel PCM service boards) and a standard SNMP network management interface. The IDM OMP3500-30F physically isolated gigabit network optical multiplexer is simple to install and can meet the requirements of various application environments.
View Details →
IDM OMP4000-4E1-30E Ultra-Broadband Integrated Service Optical Multiplexing Equipment, 4 Gigabit Ethernet Ports, 4 E1 Ports, 30 Telephone Channels
Dual 5G optical ports with 1+1 protection
IDM OMP4000-4E1-30E physically isolated gigabit network telephone optical multiplexer with 5G optical interfaces, 19-inch 1U standard chassis, providing 2 × 5 Gbps SFP optical interfaces with 1+1 protection for optical ports; providing 30 voice access channels + 4 E1 + 4 physically isolated line-rate gigabit Ethernet ports; providing a standard SNMP network management interface;
View Details →
IDM OMP4000-8E1-24 Ultra-Broadband Integrated Service Optical Multiplexing Equipment
4-channel isolated gigabit
The IDM OMP4000-8E1-24 physically isolated gigabit network optical multiplexer utilizes 5G optical fiber transmission bandwidth (G.703 standard) and adopts the PCM30/31 format. It provides dual-fiber mutual backup, 24-channel 64K narrowband subscriber access + 4E1 + 4 physically isolated line-rate gigabit Ethernet interfaces, and dual 2.5G optical fiber parallel transmission. Meanwhile, the IDM OMP4000-8E1-24 physically isolated gigabit network optical multiplexer is simple to install and can meet the requirements of various application environments.
View Details →
IDM OMP64 Integrated Service Optical Fiber Transmission Equipment
Dual Gigabit Physically Isolated 64-Channel Telephone Single-Fiber 2.5G Saves One Optical Multiplexer
The IDM OMP64 physically isolated gigabit network optical multiplexer has a total optical fiber transmission bandwidth of 2.5G and provides 2 independent 1000M Ethernet interfaces and 64 telephone subscriber channels; meanwhile, the IDM OMP64 physically isolated gigabit network optical multiplexer is simple to install and can meet the requirements of various application environments.
View Details →
IDM OMP64 Integrated Service Optical Fiber Transmission Multiplexing Platform
A single optical fiber carries 64 telephone channels plus dual gigabit networks; 9 slots for on-demand card configuration
The IDM OMP64 optical multiplexer adopts a 19-inch 2U standard chassis; its total optical fiber transmission bandwidth is 2.5G, providing 2 independent 1000M Ethernet interfaces and 64 telephone subscriber channels; it provides 9 subscriber interface slots.
View Details →
IDM OPT-E1 Optical Modem
Interoperable with single E1 bridge optical port; desktop dual power supply ≤5 W; star capacity expansion by adding remote units
The IDM OPT-E1 optical modem has a desktop form factor. Each unit provides an E1 transmission channel over optical fiber, including clock extraction and transmission. It can interoperate with the optical port of a single E1 bridge and can easily form a star network with centralized optical modems. The device supports dual power supply of AC 220 V and DC -48 V and can be used in various fields such as LAN interconnection, video on demand, and remote monitoring.
View Details →
IDM-OPT4FE Fast Ethernet Media Converter
2 electrical ports and 2 optical ports, data and voice over the same fiber, dual optical port cascading capacity expansion, no network planning changes required
The IDM-OPT4FE Fast Ethernet media converter is an optical-to-electrical signal conversion device used to convert gigabit Ethernet electrical signals from computers into optical signals. It complies with the IEEE802.3z/AB standard. Its features include: the electrical port signal can be 10/100Base-T adaptive, and can operate in full-duplex or half-duplex mode; the optical port signal can only operate in 100Base-SX/LX full-duplex mode. It offers good stability and reliability.
View Details →
IDM OPTCOM Serial Port Fiber Optic Transmission Device
Jumper-Switched Three Serial Port Types, Single-Fiber Aggregation of Multiple Services, 120 km, 17-Slot Hot-Swappable Dual Power Supply
The serial port fiber optic transmission device has stronger anti-interference capability and is not affected by electromagnetic interference, lightning strikes, or ground loop problems, ensuring high reliability and security of data transmission. It supports multiple serial port protocols such as RS-232, RS-485, and RS-422; users can switch between different interface types via jumpers to adapt to diverse device communication requirements; serial port rate adaptive (0~115200 bps), automatically adjusting the rate to ensure transmission efficiency; the internal sampling frequency for RS-232, RS-485, and RS-422 services is 13 MHz; supports 1 channel of CTS and RTS control transmission
View Details →
IDM OSW10 All-Optical Ethernet Switch
8 Fast Ethernet Optical Ports Direct Input, Saves 8 Media Converters, 2 Gigabit Optical/Electrical Combo Uplinks, 26 Port Groups V
The IDM OSW10 gigabit all-optical Ethernet switch is a Layer 2 wire-speed Ethernet switching product independently developed by Raytrans. It is an intelligent switch designed for network environments that require high performance and easy installation. The IDM OSW10 provides 2 gigabit copper
View Details →
IDM Phone_DUP Telephone Channel Mutual Backup
1-to-2 automatic optimal selection, dual criteria of ringing and incoming number, cascading expansion
Some important remote dispatch and control sites (such as subways, airports, and military) often require high system reliability and frequently use services over more than 2 transmission networks (for example, leasing channels from China Unicom and China Mobile separately, or mutual backup between satellite and terrestrial networks).
View Details →
IDM POE-M4 PoE Fiber Uplink Switch
4-port 30W power supply, SFP fiber uplink, 200 m per-port power supply, saves power cables
The IDM POE-M4 PoE fiber optic Ethernet switch has 4 PoE-powered RJ45 ports and 1 RJ45/1 SFP fiber module expansion slot, and supports RJ45/SFP port uplink. All 4 RJ45 ports support IEEE 802.3af/at standard PoE power supply, with a maximum per-port power supply of 30W and a maximum overall power of 65W. It can automatically detect and identify powered devices compliant with the IEEE 802.3af/at standard and supply power over the network cable via the priority mechanism.
View Details →
IDM-RACK3U Centralized Protocol Converter
17 remote ends aggregated in one chassis, eight types of service cards mixed insertion, single board failure swap without service interruption
The centralized protocol converter adopts a 19-inch 3U front-loading card-based structure. Each card corresponds to one remote RS232/422/485 data optical multiplexer or single-E1 bridge (optical modem), E1 optical multiplexer, high-speed serial optical modem, fiber optic switch, serial-to-bidirectional HDMI converter, telephone optical multiplexer, or E1 (V.35) optical modem, and can easily form a star network. The IDM-RACK3U centralized protocol converter makes full use of the large amount of existing E1/optical fiber resources in telecommunications networks to extend the transmission distance and application scope of Ethernet, providing a better solution for Ethernet access. This product can be used in local area
View Details →
IDM-RACK5U Centralized Bridge
5U front-card mixed insertion saves rack positions; one card supports two remote ends, up to 32 channels at full configuration; card replacement without removing the unit
The IDM-RACK5U centralized bridge is a rack-mounted, small-capacity multi-user access network platform system designed for star network topologies with large-user access. It offers high integration and strong compatibility, and can be flexibly configured with different quantities and types of
View Details →
IDM RG-3200 Audio and Video Converged Communication Host
9 gigabit optical ports for direct multi-node connection, voice and video switching in one chassis, panel LEDs for locating broken fibers
The IDM RG3200 audio converged dispatching exchange is a PBX/IPPBX converged communication device developed and designed by Raytrans, carefully built for telecom carriers, government, industries and large and medium-sized enterprise users, and powerful in function. The product is designed with advanced digital integrated circuits, a highly integrated optimized structure and PBX/IPPBX communication technology. It can be deployed on the enterprise side or in a carrier equipment room, providing users with an integrated solution that converges audio and video into one. The system adopts a modular design and board-based assembly, and supports PRI, NO.1, NO.7, SIP/H.323
View Details →- 1
- 3
- 4
- 5
- 6
- 7
- 15
PDH
The PDH category covers optical communication transmission and integrated access equipment that we engineer and manufacture.
- IDM OMP2000-8E1-30 Optical Multiplexer
- IDM OMP2400 Ultra-broadband Integrated Service Optical Multiplexing Equipment
- IDM OMP2400-8E1-30 Ultra-Broadband Integrated Service Optical Multiplexing Equipment
- IDM OMP3500-30 Integrated Service Optical Fiber Transmission Equipment
- IDM OMP4000-4E1-30E Ultra-Broadband Integrated Service Optical Multiplexing Equipment, 4 Gigabit Ethernet Ports, 4 E1 Ports, 30 Telephone Channels
电话光端机
The 电话光端机 category covers optical communication transmission and integrated access equipment that we engineer and manufacture.
网桥转换器
The 网桥转换器 category covers optical communication transmission and integrated access equipment that we engineer and manufacture.
光纤收发器
The 光纤收发器 category covers optical communication transmission and integrated access equipment that we engineer and manufacture.
PCM
The PCM category covers optical communication transmission and integrated access equipment that we engineer and manufacture.
电梯终端
The 电梯终端 category covers optical communication transmission and integrated access equipment that we engineer and manufacture.