IDM GP2000-4E1 PDH Optical Multiplexer
The IDM GP2000-4E1 PDH Optical Multiplexer provides two SFP optical interfaces, five E1 circuits, and two 1000M line-speed Ethernet interfaces in a single unit. It offers an SNMP network management interface, comprehensive alarm and monitoring functions, high integration, low power consumption, stable performance, and ease of use. The GP2000 can interconnect with the GP2400 via optical ports, with dual SFP optical ports providing mutual backup. It is widely used in private networks such as public security, power, railway, and mining, as well as public networks operated by China Mobile, China Unicom, and China Telecom.
I. Overview
The IDM GP2000-4E1 PDH Optical Terminal is a new-generation high-speed fiber transmission device launched by Beijing Ruiguang Jiyuan Digital Technology Co., Ltd. It integrates Gigabit Ethernet transmission and E1 service transmission, meeting the fiber transmission and access requirements of a wide range of users. The IDM GP2000-4E1 PDH Optical Terminal provides two SFP optical interfaces, five E1 circuits, and two 1000M line-speed Ethernet interfaces per unit. The optical terminal offers an SNMP network management interface, comprehensive alarm monitoring functions, high integration, low power consumption, stable performance, and ease of use.
The GP2000 optical terminal can interconnect with the GP2400 via optical ports, with dual SFP optical ports providing mutual backup. The optical terminal is widely used in private networks such as public security, electric power, railway, and mining, as well as public networks operated by mobile, Unicom, and telecom carriers.

II. Product Image

III. Product Features
19-inch standard 1U chassis structure;
Supports 2 SFP optical transmission interfaces;
Supports up to 4 E1 interface transparent transmission, with E1 interface selectable at 75Ω or 120Ω;
Provides 2 groups of physically isolated 1000M Ethernet;
Standard model supports non-repeater transmission distance of 40 kilometers; custom distances available beyond this range;
DC -48V and AC 220V power supply, with optional DC+DC, AC+AC, AC+DC dual backup power.
IV. Technical Specifications
1) Optical Interface
Interface Type | SFP | Fiber Mode | Single-mode (Multi-mode optional) |
Tx/Rx Rate | 2.5G | Tx/Rx Wavelength | 1310nm/1550nm |
Optical Output Power | -1~-3dBm | Receiver Sensitivity | Better than-24dBm |
Transmission Distance | 20Km; optional long-distance optical modules are available for extended fiber transmission over greater distances | ||
2) E1 Interface
Line Rate | 2.048Mbps | Line Code | HDB3 |
Standard Protocol | SupportsITU-T G.703 | Impedance | 75Ω/120Ω |
Frame Structure | PCM30/32 | Signaling | Channel-Associated Signaling |
3) Ethernet
Interface Type | 75Ω-BNC-/120Ω-RJ45 | Transmission Rate | 10M/100M/1000MAuto-negotiation |
Standard Protocol | SupportsIEEE802.3 | Operating Mode | Full/Half Duplex/Auto-negotiation |
4) Power Supply and Power Consumption
Power Supply | AC220V/DC-48V | Power Consumption | ≤90W |
5) Environmental Conditions
Operating Temperature | -10oC ~+50oC | Relative Humidity | 0~95% (non-condensing) |
6) Product Dimensions
Length×Depth×Height | 482×309×132(mm) |
V. Typical Applications

FAQs
What is the difference between PDH and SDH?
I. PDH PDH is the Plesiochronous Digital Hierarchy, which is divided into the European standard and the…
View answerWhat is an E1 line? What are the core knowledge points?
E1 Basics Frame Structure of the E1 Channel In an E1 channel, 8 bits form one timeslot (TS)…
View answerWhat is E1? How to Use E1
What is E1 The European 30-channel pulse code modulation PCM is abbreviated as E1, with a rate of 2.048Mbit/s.
View answerCommunication Transmission Products
PDH Equipment Physically Isolated Gigabit Multi-service Optical Terminal IDM GP2400 Series Optical Terminal IDM…
View answerIntroduction to EoPDH Technology
Ethernet-over-PDH is a set of technologies and standards used to transport local Ethernet frames over established…
View answer


