IDM OMP3500 Integrated Service Access Platform

Overview

 

The IDM OMP3500 Integrated Service Access Equipment is a comprehensive multiplexing platform that can transmit up to 16 groups of transparent E1, 2 groups of physically isolated line-rate Gigabit Ethernet, 4 groups of line-rate physically isolated 100M Ethernet, and 30 channels of narrowband PCM over 2.5G optical fiber. It provides 2 groups of 2.5G optical fiber mutual backup.

PCM narrowband services provide various user interfaces such as voice, data, and image. It also has a non-blocking cross-connect device for timeslots between 2 groups of E1 and all user interfaces. The device supports multiple clock modes to meet clock requirements in various application environments.

It can simultaneously provide ~220V and -48V power supply.

Device fiber multiplexing principle block diagram

IDM OMP3500 Integrated Service Access Platform image

Product Features

19-inch standard chassis, modular design, 3 service slots, supports hot-swappable with power on;

Uses large-scale ASIC chip design, high integration

Provides up to 4 SFP  2.5G optical transmission interfaces, can form point-to-point, chain, ring, or 1+1 protection networks; transmission distance supports 20KM, 40KM, 80KM;

Provides 2 groups of physically isolated line-rate Gigabit Ethernet and 4 groups of line-rate physically isolated 100M Ethernet;

Provides up to 16 groups of transparent E1; physical interface is CC3-16 or CC3-8;

Provides up to 30 channels of narrowband PCM service access capability;

Can be configured for mutual backup of PCM services on optical fiber and the first E1;

Supports SNMP Ethernet network management;

Supports FXS/FXO, magneto cards, each card with 10/8 service interfaces;

2/4-wire EM interface card, each card with 4 interfaces;

RS232/RS422/RS485 each card with 8 interfaces;

 GSM/CDMA service each card with 2 channels;

USER universal interface card, can mix 4 PCM service modules, each module up to 2 channels.

Supports video surveillance and video conference boards;

Supports DC-48V and AC220V dual power supply

**Technical Specifications

**

Optical Interface

Interface Type	SFP	Fiber Mode	Single-mode (optional multi-mode)
Rate	2.5Gbps	Wavelength	1310/1490/1550
Transmit Power	-1~-10dB	Receiver Sensitivity	Better than -24dBm

E1 Interface

Bit Rate	2.048Mbps	Line Code	HDB3
Standard Protocol	ITU-T G.703	Impedance	75Ω/120Ω
Frame Structure	PCM30/31	Mode	Transparent

Ethernet

Transmission Rate	10M or 100M or 1000M
Standard Protocol	Supports IEEE802.3	Working Mode	Full/Half Duplex/Auto-negotiation

Power Supply and Consumption

Power Supply

DC-48V/AC220V

Total Power Consumption

≤40W

Environmental Conditions

Operating Temperature

-20°C ~ +50°C

Relative Humidity

0~95% (non-condensing)

**

Application Examples**

Application 1: Point-to-Point Application Mode

Application 2: Chain Network Application Mode

Application 3: Centralized Point-to-Multipoint Application Mode

This networking method simplifies central equipment room configuration and management. One centralized IDM-OMP device can connect up to 9 IDM-OMP3500 devices.

*Application 4: IDM OMP*** and IDM G3CP** Mixed Mode with Various Broadband Fiber Access Equipment