Contact
IDM OMP3500E Integrated Service Optical Fiber Transmission Equipment

IDM OMP3500E

IDM OMP3500E

Telephone Optical Terminal·📅UpdatedMay 12, 2026·✍️管理员

2.5G optical interface, 19-inch 2U standard chassis, (up to 24 groups of E1 + 2 channels of physically isolated line-rate 1000M Ethernet + 4 channels of physically isolated line-rate 100M Ethernet + up to 6 PCM service plug-in cards with 8/10 channels each) provides standard SNMP network management interface. The IDM OMP3500E physically isolated Gigabit Ethernet optical terminal is easy to install and can meet the requirements of various application environments.

I.  Overview

The IDM OMP3500E Integrated Service Optical Fiber Transmission Equipment is one of the PCM integrated service transmission equipment series designed by our company using large-scale integrated circuits. This equipment utilizes standard optical fiber transmission channels (G.703 standard), adopts the PCM30/31 format, and supports dual-fiber mutual backup, with up to 24 groups of E1 + 2 channels of physically isolated wire-speed 1000M Ethernet + 4 channels of physically isolated wire-speed 100M Ethernet + up to 6 PCM service plug-in cards of 8/10 channels. It provides a standard SNMP network management interface. Meanwhile, the equipment is easy to install and can meet the requirements of various application environments.

II. Product Features

II.  Product Features

Ø Standard 19-inch 2U chassis architecture for easy installation;

Ø Provides 2 2.5G SFP optical interfaces, supporting 1+1 optical port protection;

Ø Up to 24 groups of E1 + 2 channels of physically isolated wire-speed 1000M Ethernet + 4 channels of physically isolated wire-speed 100M Ethernet + up to 6 PCM service plug-in cards of 8/10 channels; Ø Provides 2 independent wire-speed 1000M Ethernet interfaces;

Ø Centralized equipment provides standard SNMP network management interface;

Ø Equipped with comprehensive function control switches and alarm indication functions.

III.  Technical Specifications

Optical Interface

Interface Type

SFP

Fiber Mode

Single-mode (Multi-mode optional)

Fiber Rate

2.5G

Wavelength

1310nm/1550nm

Transmit Power

-1~-3dBm

Receiver Sensitivity

Better than -24dBm

E1 Interface

Bit Rate

2048Kbps

Line Code

HDB3

Standard Protocol

Supports ITU-T G.703

Impedance

75Ω

Frame Structure

PCM30/31

Mode

Transparent Transmission

Ethernet

Interface Type

RJ45

Transmission Rate

10M/100M/1000M

Standard Protocol

Supports IEEE802.3

Operating Mode

Full/Half Duplex/Auto-negotiation

FXO/FXS Interface

Audio Range

300Hz~3400Hz

Impedance

Triple complex impedance 200Ω+560Ω//0.1μF

Compression Rate

A-law in ITU G.711

Loop Current

25mA/channel

Power Supply and Consumption

Power Supply Mode

DC-48V /AC 220V/Dual Power Supply

Total Power Consumption

≤100W

Environmental Conditions

Operating Temperature

0ºC~40ºC

Humidity

≤90% (non-condensing)

FAQs

Top 10 Common Questions About Telephone Optical Terminals

Based on years of experience in the production and R&D of telephone optical terminals…

View answer

How to Troubleshoot Common Faults of Telephone Optical Terminal?

Device cannot be powered on Check whether the power cable is connected correctly.

View answer

What is the difference between single-fiber and dual-fiber?

The biggest difference between single-fiber and dual-fiber optical terminals lies in the optical modules on their…

View answer

What is an Optical Terminal?

Many people are unfamiliar with the optical terminal, but in essence, it is a dedicated device for optical-electrical…

View answer