Contact
IDM GP2000-30E Ultra-Broadband Integrated Service Optical Multiplexer 30 Telephone Lines 2 Gigabit Ethernet 4E1

IDM GP2000-30E Ultra-Broadband Integrated Service Optical Multiplexer 30 Telephone Lines 2 Gigabit Ethernet 4E1

📅May 12, 2026
Model:IDM GP2000|Category:Telephone Optical Terminal

The IDM GP2000-30E Ultra-Broadband Integrated Service Optical Multiplexer utilizes 2.5G optical fiber transmission bandwidth (G.703 standard) and adopts the PCM30/31 format. It provides dual-fiber mutual backup, directly offering telephone service interfaces (30 channels of FXO, FXS, or Magneto), 2 groups of physically isolated wire-speed 1000M Ethernet (2000M total), E1 (1-4 E1 channels), HDMI HD video transmission, and various other user interfaces. Meanwhile, the equipment features easy installation and is adaptable to various application environment requirements. It provides dual-fiber mutual backup and can also be combined with other devices to form multiple groups of physically isolated Ethernet chain network telephone optical terminals, ring network telephone optical terminals, and point-to-multipoint star network telephone optical terminals.

Dual Gigabit Ethernet Telephone Optical TerminalIndependent Gigabit Ethernet Telephone Optical TerminalIndependent Gigabit Ethernet PCM Equipment1000M Telephone Optical TerminalGigabit Ethernet Optical Terminal

Gallery

I. Overview

The IDM GP2000-30E Ultra-Broadband Integrated Service Optical Multiplexer utilizes 2.5G optical fiber transmission bandwidth (G.703 standard) and adopts the PCM30/31 format. It provides dual-fiber mutual backup, directly offering telephone service interfaces (30 channels of FXO, FXS, or Magneto), 2 groups of physically isolated wire-speed 1000M Ethernet (2000M total), E1 (1-4 E1 channels), HDMI HD video transmission, and various other user interfaces. Meanwhile, the equipment features easy installation and is adaptable to various application environment requirements.
It provides dual-fiber mutual backup and can also be combined with other devices to form multiple groups of physically isolated Ethernet chain network telephone optical terminals, ring network telephone optical terminals, and point-to-multipoint star network telephone optical terminals.

II. Product Features

II. Product FeaturesIDM GP-2000 Ultra-Broadband Integrated Service Optical Multiplexer Rear Panel.JPG

II. Product Features

Ø Standard 19-inch 1U chassis architecture for easy installation;

Ø Provides 2 2.5Gbps SFP optical interfaces with optical port 1+1 protection;

Ø Provides 30 standard-defined telephone interfaces;

Ø Provides 2 independent 1000M Ethernet interfaces;

Ø Provides 4 groups of E1 interfaces supporting transparent transmission mode;

Ø Provides a standard SNMP network management interface;

Ø Features comprehensive function control switches and alarm indication functions.

III. Technical Specifications

Optical Interface

Interface Type
SFP
Fiber Mode
Single-mode (Multi-mode optional)
Fiber Rate
2.5Gbps
Wavelength
1310nm/1550nm
Transmit Power
-1~-3dBm
Receiver Sensitivity
Better than-24dBm

E1 Interface

Line Rate
2048Kbps
Line Code
HDB3
Standard Protocol
SupportsITU-T G.703
Impedance
75Ω/120Ω
Frame Structure
PCM30/31
Mode
Transparent

Ethernet

Interface Type
RJ45
Transmission Rate
10M/100M/1000M
Standard Protocol
SupportsIEEE802.3
Operating Mode
Full/Half Duplex/Auto-Negotiation

FXO/FXS Interfaces

Audio Frequency Range
300Hz~3400Hz
Impedance
Triple Complex Impedance200Ω+560Ω//0.1Μf
Compression Ratio
ITU G.711 A-law
Loop Current
25mA/channel

Power Supply and Power Consumption

Power Supply
DC-48V / AC 220V / Dual Power Supply
Power Consumption
≤100W

Environmental Conditions

Operating Temperature
0ºC40ºC
Humidity
≤90%(Non-condensing)

IV. Application Examples

IV. Application Examples