What interfaces does the IDM-OXC optical cross-connect equipment provide, and what devices and services can it connect to?

The IDM-OXC optical cross-connect equipment is installed in a 19-inch 6U rack-mounted format. Its optical interfaces are distributed in the rear panel area of the equipment and use LC/UPC connectors, compatible with conventional LC/UPC pigtails and patch cords, and the optical port capacity on both the input side and the output side is no less than 48 cores. The management interface is a standard RJ45 network port that can be connected directly to the existing O&M network in the equipment room, with cross-connection relationships issued by the intelligent O&M platform. The equipment is additionally equipped with an OTDR detection module and a received optical power detection module: received optical power detection is used to monitor the received optical power at each port, and the OTDR detection module is used for fiber link testing; working together, the two support online fiber monitoring, and the equipment can also coordinate networking with SDH equipment, intelligent ODF and other products.